Actuator Details: Body M.S. Pressed Actuator Type Diaphragm Single Acting Actuator Action Direct / Reverse Acting, Normally Open / Normally Close Operating Pressure 1.4 to 4.5 BAR Valve Details: Size Range 1/2″ to 8″ Body Cast Iron /
Pneumatic Aluminum Butterfly Valve for Cement
Model CMT Size 4″ to 16″ Seals NBR Temperature Up to 85°C Pressure Up to 4 to 6 Kg/Cm² Media Cement
Pneumatic Ball Valve
Model HBA Body CF8M Size 1/2″ & 1″ Ball CF8M Seals CFT Leakage Class VI Temperature Up to 180°C Pressure Up to 200 Kg/Cm² Media Air, Water, Oil & Gas Ends Screwed
Fisher™ Vee-Ball™ V150S Flanged Control Valve
The Fisher Vee-Ball V150 control valve is your best choice for performance and cost-effectiveness across a broad range of applications. The precision-machined parts and pressure-balanced seal designs allow smooth, precise valve operation. Valve End Connection Styles Flanged valves that mate
Baumann™ 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
The Baumann 24000 control valve is intended for general utility service in pressure, flow, and temperature control applications. This control valve exhibits low hysteresis and deadband, good control characteristics, tight shutoff, rugged construction, high performance packing, and easy maintainability. These
Fisher™ GX Control Valve And Actuator System
The Fisher GX valve and actuator system can meet a wide range of flow and pipeline sizing requirements. A three-way construction is available, which is suited for accurate temperature control. The engineered passages within the valve body provide optimal capacity
Fisher™ easy-e™ EZ Control Valve
The Fisher easy-e EZ control valve is your solution for throttling or on/off control in chemical or hydrocarbon processing applications, or wherever control of non-lubricating, viscous, or other hard-to-handle fluids is necessary. Applications Heavy-duty general service for controlling liquids and
Reducer
material: Q235, 20 #, 10 #, Q345, A234, WPB, WP5, WP9, WP11, ST37.0, ST35.8, ST37.2, ST35.4 / 8, ST42, ST45, ST52, ST52.4, STP G38, STP G42 , STPT42, STB42, STS42, STPT49, STS49 Standard: ASTM A234, ASTM A420, ANSI B16.9 /
Elbow
Material: A234-WPB, A420-WPL6, A234-WP12, A234-WP11, A234-WP5, A403-WP304, A403-WP304L, A403-WP316, A403-WP316LStandards: ISO, SNSI, JIS, DIN, GB / T12459, GB / T13401, ASME B16.9, SH3408, SH3409, HG / T21635, HG / T21631SY, T05010Size: 1/2 “-48”Thickness: Sch5-Sch160Angle: 15 degrees, 30 degrees, 45 degrees,
Flange
Type: Flat flange, diameter welded flange, diameter welded flange, blind flange, 8-word blind flange, threaded flange Materials：A105, SS400, 304, 316, 304L, 316L, 321 Standard: ASME B16.5, ASME B16.47, EN 1092, ISO7005-1, American Water Works Association AWWA C207, JIS2220 etc. Sizes: